Yamaha CLP-220 User Manual download pdf (Page 34)

CLP-220 Keyboard Stand Assembly

ENGLISH

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to

install all parts in the correct direction. Please

assemble in accordance with the sequence given

below.

• Assembly should be carried out by at least two per-

sons.

• Be sure to use the included screws only, and insert

screws of the correct size in the correct hole loca-

tions. Do not use any other screws. Use of incorrect

screws can cause damage or malfunction of the

product.

• Be sure to tighten up all screws upon completing

assembly of each unit.

•To disassemble, reverse the assembly sequence

given below.

Remove all parts from the package and make sure you

have all of the items.

1. Attach (ﬁnger-tighten) C to D and E.

1-1 Untie and straighten out the bundled pedal

cord. Don’t discard the vinyl tie. You will

need it later in step 6.

1-2 Align D and E with each end of C.

1-3 Attach D and E to C by ﬁnger-tightening the

long screws 1 (6 × 20mm).

2. Attach B.

Depending on the model of Clavinova you purchased,

the surface color of one side of B may be different from

the other side. In this case, position B so that the side

of the surface color similar to D and E faces the player.

2-1 Place the lower side of B on each foot of D

and E, then attach the upper side to D and E.

2-2 Attach the top of B to D and E by ﬁnger-

tightening the thin screws 3 (4 × 12mm).

2-3 While pushing the lower part of D and E

from outside, secure the bottom ends of B

using two tapping screws 4 (4 × 20mm).

2-4 Insert the other two tapping screws

(4 ×

20mm) into the other two screw holes to secure

Have a Phillips-head (+) screwdriver ready

Assembly Parts

6 × 20 mm long screws ×4 1

4 × 12 mm thin screws ×2

Cord holders × 2

Side panel protection

(cardboard) pads × 2

6 × 16 mm short screws ×4

20 mm tapping screws

4 × 10 mm thin screws ×2

5 Headphone hanger

Headphone hanger set

Bundled pedal

cord inside

AC power cord

1-2

1-1

1-3

Place the bottom

ends of the rear

panel on each foot.

2-1

2-2

2-4

2-3

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Comments to this Manuals

No comments

Yamaha CLP-220 User Manual Page 34

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha CLP-220