Yamaha NS-515F Owner's Manual download pdf (Page 3)

English

E-3

SPEAKERS

–

CONNECTIONS TO YOUR AMPLIFIER

This speaker system is capable of standard connections and bi-wired connections. Before making

connections, make sure that the amplifier is switched off.

■CONNECTIONS

• Connect the screw-type input terminals at the rear of the

speakers to the speaker output terminals of the amplifier

(or receiver) with the speaker cable.

• Connect the (+) terminals on the amplifier (or receiver)

and the speakers using one side of the cable. Connect

the (–) terminals on both components using the other

side of the cable.

• Connect one speaker to the left (marked L) terminals of

your amplifier, and another speaker to the right (marked

R) terminals, making sure not to reverse the polarity

(+, –). If one speaker is connected with reversed polarity,

the sound will be unnatural and lack bass.

How to connect:

1 Loosen the knob.

2 Remove the insulation coating at the extremity of each

speaker cable by twisting the coating off.

3 Insert the bare wire.

4 Tighten the knob and secure the cables.

Test the firmness of the connection by pulling lightly on

the cables at the terminal.

Note

Do not let the bare speaker wires touch each other as

this could damage the speaker or the amplifier, or both

of them.

NS-515F

Speakers output

terminals of the

amplifier

Leave the short

bars in place

when

connecting.

Short bar

Amplifier or

Receiver

Loosen

Tighten

When using a banana plug

1 Remove the cover by pulling it toward you.

2 Tighten the terminal knob.

3 Simply insert the banana plug into the terminal.

Banana plug

(L)(R)

NS-515F ENG(02.8.21)a 02.8.21, 8:38 PM3

1 2 3 4 5

Comments to this Manuals

No comments

Yamaha NS-515F Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Musical Instrument Amplifier Yamaha NS-515F