Yamaha YZF-R6 L 2000 Specifications download pdf (Page 36)

– 32 –

19.Wire Harness Set (5SL-F2590-70)

• Do not remove the AC generator but leave it to function. Using the battery alone will

result in the inability to run in a short time.

• This harness enables the meter to light up when the main switch is turned on.

• The circuit to the oil level gauge and the fuel sender need not be connected, though

the oil warning light and fuel warning light come on. But there will be no problem

with a run.

* Use STD parts for the following.

Engine stop switch

Relay assembly

Emergency stop switch

Battery positive lead

Battery negative lead

CAUTION:

When installing the emergency stop switch, take care to insert the coupler straight in so

that the terminal is not bent.

Other functions

• Combination with the ECU in this harness kit enables the engine stop switch to be

used.

Attach the switch between the black leads or between the black/yellow (BY) and the

black (B) lead, which are shorted on the white 3-pin coupler under the tank.

When the switch is on, it cuts ignition, but note that it does not function when

transmission is running.

• When the black 2-pin coupler located under the seat is removed, the ECU control data

changes to the ST specification. Note, however, that the engine stop switch functions

only with the STD transmission.

Parts List

No. PART No. PART NAME Q'TY REMARKS

1 5SL-82590-70 HARNESS ASS'Y 1

2 5FL-83976-70 SWITCH, MAIN 1

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 72 73

No comments

Yamaha YZF-R6 L 2000 Specifications Page 36