Yamaha YZF-R6 L 2000 Specifications download pdf (Page 14)

– 10 –

6. Sub Radiator Set (5SL-A240A-70)

Installation Precautions

1. This kit assumes that the muffler kit set is used. It cannot be mounted on the STD

muffler by itself, or may not be mounted either when a competitor’s muffler is

installed.

2. Use the STD main radiator. Also use the STD hose that goes into the radiator from

the oil cooler.

3. Remove the cleaning fan attached to the STD radiator.

4. Do not fasten the hose clamp too tight. The hose may become deformed and leak

water.

5. After installation, check that the radiator and hose are not in contact with the exhaust

pipe.

6. Pass the clutch wire alongside on the outside of (Joint, hose)

7. Trapped air in the water passage reduces the cooling efficiency. When refilling water,

incline the motorcycle right and left to allow no water to remain in the water passage.

After refilling, idle run the engine for a while with the radiator cap removed. Then add

water to fill up the vacancy produced by escaping water and tighten the cap securely

on the radiator.

Parts List

No. PART No. PART NAME Q'TY REMARKS

1 5SL-1240A-80 SUB RADIATOR ASSY 1

2 5SL-12467-70 COVER, RADIATOR 1

* 3 90465-13275 CLAMP 4

4 5SL-1244E-70 BRKT., 1 1

* 5 91317-06012 BOLT 1

6 5SL-12578-70 HOSE, 3 1

7 5SL-12584-70 JOINT, HOSE 3 1

8 5SL-12579-70 HOSE, 4 1

9 5SL-12552-70 HOSE, 8 1

10 5SL-12589-70 HOSE, 6 1

11 5SL-12588-70 HOSE, 5 1

12 5SL-12582-70 JOINT, HOSE 2 1

* 13 90450-38040 HOSE CLAMP ASSY. 12

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 72 73

No comments

Yamaha YZF-R6 L 2000 Specifications Page 14