Yamaha YZF-R1S Owner's Manual download pdf (Page 51)

OPERATION AND IMPORTANT RIDING POINTS

6-1

6

EAU15951

Read the Owner’s Manual carefully to

become familiar with all controls. If

there is a control or function you do not

understand, ask your Yamaha dealer.

WARNING

EWA10271

Failure to familiarize yourself with

the controls can lead to loss of con-

trol, which could cause an accident

or injury.

EAU47150

TIP

This model is equipped with:

● a lean angle sensor to stop the en-

gine in case of a turnover. In this

case, the multi-function meter unit

indicates error code 30, but this is

not a malfunction. Turn the key to

“OFF” and then to “ON” to clear the

error code. Failing to do so will pre-

vent the engine from starting even

though the engine will crank when

pushing the start switch.

● an engine auto-stop system. The

engine stops automatically if left

idling for 20 minutes. In this case,

the multi-function meter unit indi-

cates error code 70, but this is not

a malfunction. Push the start

switch to clear the error code and

to restart the engine.

EAU47542

Starting the engine

In order for the ignition circuit cut-off

system to enable starting, one of the

following conditions must be met:

● The transmission is in the neutral

position.

● The transmission is in gear with

the clutch lever pulled and the sid-

estand up.

See page 4-29 for more informa-

tion.

1. Turn the key to “ON” and make

sure that the engine stop switch is

set to “”.

The following warning lights and

indicator light should come on for a

few seconds, then go off.

● Oil level warning light

● Fuel level warning light

● Coolant temperature warning

light

● Shift timing indicator light

● Engine trouble warning light

● Steering damper warning light

U14B11E0.book Page 1 Thursday, July 16, 2009 8:46 AM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 119 120

Comments to this Manuals

No comments