Yamaha YZF-R1C Owner's Manual download pdf (Page 76)

PERIODIC MAINTENANCE AND MINOR REPAIR

6-19

8. Remove the coolant drain bolt to

drain the cooling system.

9. Loosen the radiator hose clamp

screw located at the left side of the

engine, and then pull off the hose

to drain the radiator.

10. After the coolant is completely

drained, thoroughly flush the cool-

ing system with clean tap water.

11. Install the coolant drain bolt, and

then tighten it to the specified

torque.

NOTE:

Check the washer for damage and re-

place it if necessary.

12. Connect the radiator hose, and

then tighten the clamp screw.

13. Pour the specified amount of rec-

ommended coolant into the radia-

tor and reservoir.

1. Coolant drain bolt

2. Clamp screw

Tightening torque:

Coolant drain bolt:

10 Nm (1.0 m·kgf, 7.2 ft·lbf)

Antifreeze/water mixture ratio:

1:1

Recommended antifreeze:

High-quality ethylene glycol

antifreeze containing corrosion

inhibitors for aluminum engines

Coolant quantity:

Total amount:

2.45 L (2.16 lmp qt, 2.59 US qt)

Coolant reservoir capacity:

0.24 L (0.21 lmp qt, 0.25 US qt)

U5PW10.book Page 19 Thursday, January 10, 2002 12:15 PM

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 132 133

No comments

Yamaha YZF-R1C Owner's Manual Page 76