Yamaha YZF-R1C Owner's Manual Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
OPERATION AND IMPORTANT RIDING POINTS
5-4
5
EAU00427
To decelerate
1. Apply both the front and the rear
brakes to slow the motorcycle.
2. Shift the transmission into first
gear when the motorcycle reaches
25 km/h (15.5 mi/h). If the engine
is about to stall or runs very rough-
ly, pull the clutch lever in and use
the brakes to stop the motorcycle.
3. Shift the transmission into the neu-
tral position when the motorcycle
is almost completely stopped. The
neutral indicator light should come
on.
EAU02989
Recommended shift points
The recommended shift points during
acceleration and deceleration are
shown in the table below.
CF-05E
EAU01128
Engine break-in
There is never a more important period
in the life of your engine than the period
between 0 and 1,600 km (1,000 mi).
For this reason, you should read the
following material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1,600 km (1,000 mi). The various parts
in the engine wear and polish them-
selves to the correct operating clear-
ances. During this period, prolonged
full-throttle operation or any condition
that might result in engine overheating
must be avoided.
Acceleration
shift point
km/h (mi/h)
Deceleration
shift point
km/h (mi/h)
1st 2nd
2nd 3rd
3rd 4th
4th 5th
5th 6th
20 (12.5)
30 (19)
40 (25)
50 (31)
60 (37.5)
25 (15.5)
25 (15.5)
25 (15.5)
25 (15.5)
U5PW11.book Page 4 Tuesday, August 20, 2002 1:46 PM
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 133 134

Comments to this Manuals

No comments