
PERIODIC MAINTENANCE AND MINOR REPAIR
6-15
6
5. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
_
An oil filter wrench is available at a
Yamaha dealer.
_
6. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
_
Make sure that the O-ring is properly
seated.
_
7. Install the new oil filter cartridge,
and then tighten it to the specified
torque with a torque wrench.
8. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
_
Check the washer for damage and re-
place it if necessary.
_
1. Oil filter wrench
2. Oil filter cartridge
1. O-ring 1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
U5PW11.book Page 15 Tuesday, August 20, 2002 1:46 PM
Comments to this Manuals