Yamaha XLT1200 Operator's Manual Page 98

  • Download
  • Add to my manuals
  • Print
  • Page
    / 126
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 97
4-12
E
EJU00546a
STEERING CABLE INSPECTION
1) Check the smooth operation of the han-
dlebar and steering (jet) nozzle.
2) Turn the handlebar from lock to lock and
check that the clearances between the
steering (jet) nozzle and the bracket of
the reverse gate are even on both right
and left sides.
A=B
If steering is stiff or maladjusted, ask your
Yamaha water vehicle dealer to service it.
EJU00549a
SHIFT CABLE INSPECTION
Place the shift lever in the “REVERSE” posi-
tion.
Check to make sure the gate contacts the
stopper 1 on the bracket and the lever 2
contacts the reverse gate.
If reverse gate is not correct position, ask
your Yamaha water vehicle dealer to service
it.
EJU00550
THROTTLE CABLE INSPECTION
AND ADJUSTMENT
1) By pulling or releasing the throttle lever,
check that it moves back to the set posi-
tion smoothly. If not, ask your Yamaha
water vehicle dealer for service.
2) Throttle lever free play should be within
specification. If it is not, adjust it by loos-
ening the lock nut 1 and turning the
adjuster 2 so that throttle lever free play
is within specification with the carburetor
at idle position.
Throttle lever play a:
4 ~ 7 mm (0.16 ~ 0.28 in)
Page view 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 125 126

Comments to this Manuals

No comments