Yamaha XLT1200 Operator's Manual Page 101

  • Download
  • Add to my manuals
  • Print
  • Page
    / 126
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 100
4-15
E
N
O
TE:
Before installing the spark plug cap, be
sure to wipe off any water on the spark
plug or inside the cap. Push the spark
plug cap down until it clicks.
If a torque wrench is not available when
fitting a new spark plug, good estimate of
the correct torque is 1/4 to 1/2 a turn past
finger-tight. Have the spark plug adjusted
to the correct torque as soon as possible
with a torque wrench.
EWJ00088
WARNING
When removing or installing a spark
plug, be careful not to damage the insu-
lator. A damaged insulator could allow
external sparks, which could lead to
explosion or fire.
EJU00553a
LUBRICATION POINTS
Coat the moving parts that are sliding or
rotating with the water resistant grease to
keep them move smoothly.
Throttle cable (carburetor side)
Oil pump cable
Throttle cable (handlebar side)
Squeeze the throttle lever and remove the
seal 1. Spray a rust-inhibitor into the outer
cable. Refit the seal securely.
Recommended water resistant grease:
Yamaha marine grease
Page view 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 125 126

Comments to this Manuals

No comments