Yamaha FZ6-SHG Owner's Manual download pdf (Page 23)

INSTRUMENT AND CONTROL FUNCTIONS

3-9

3

Clock

The clock displays when the key is

turned to “ON”. In addition, the clock

can be displayed for 10 seconds by

pushing the “SELECT” button when the

main switch is in the “OFF”, “LOCK”

or “” position.

To set the clock

1. Turn the key to “ON”.

2. Push the “SELECT” button and

“RESET” button together for at

least two seconds.

3. When the hour digits start flashing,

push the “RESET” button to set the

hours.

4. Push the “SELECT” button, and

the minute digits will start flashing.

5. Push the “RESET” button to set

the minutes.

6. Push the “SELECT” button and

then release it to start the clock.

Odometer and tripmeter modes

Push the “SELECT” button to switch

the display between the odometer

mode “ODO” and the tripmeter modes

“TRIP A” and “TRIP B” in the following

order:

TRIP A → TRIP B → ODO → TRIP A

When the fuel amount in the fuel tank

decreases to 3.6 L (0.95 US gal) (0.79

Imp.gal), the left segment of the fuel

meter will start flashing, and the odom-

eter display will automatically change to

the fuel reserve tripmeter mode “F-

TRIP” and start counting the distance

traveled from that point. In that case,

push the “SELECT” button to switch the

display between the various tripmeter

and odometer modes in the following

order:

F-TRIP → TRIP A → TRIP B → ODO

→ F-TRIP

To reset a tripmeter, select it by push-

ing the “SELECT” button, and then

push the “RESET” button for at least

one second. If you do not reset the fuel

reserve tripmeter manually, it will reset

itself automatically and the display will

return to the prior mode after refueling

and traveling 5 km (3 mi).

1. Clock

2. Speedometer

1. Odometer/tripmeter/fuel reserve tripmeter

U4S8E1E0.book Page 9 Monday, July 2, 2007 10:33 AM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Comments to this Manuals

No comments