Yamaha 2010 Raider Owner's Manual download pdf (Page 28)

INSTRUMENT AND CONTROL FUNCTIONS

4-12

EAU34042

Rider seat

To remove the rider seat

1. Insert the key into the seat lock,

and then turn it counterclockwise.

2. While holding the key in that posi-

tion, lift the front of the seat up, and

then pull the seat off.

To install the rider seat

1. Insert the projection on the rear of

the seat into the seat holder as

shown.

2. Push the front of the seat down to

lock it in place.

3. Remove the key.

TIP

Make sure that the seat is properly se-

cured before riding.

EAU44441

Helmet holder

The helmet holder is located under the

rider seat. A helmet holding cable is

provided under the rider seat to secure

a helmet to the helmet holder.

To secure a helmet to the helmet

holder

1. Remove the rider seat. (See page

4-12.)

2. Pass the helmet holding cable

through the buckle on the helmet

strap as shown, and then hook the

cable loop over the helmet holder.

1. Seat lock

2. Unlock.

1. Projection

2. Seat holder

1. Helmet holding cable

2. Helmet holder

U29S12E0.book Page 12 Monday, June 1, 2009 1:05 PM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 93 94

No comments

Yamaha 2010 Raider Owner's Manual Page 28