Yamaha HTR-6090 User Manual Page 47
- Page / 152
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
SOUND FIELD PROGRAMS
43 En
BASIC
OPERATION
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
• When you set the “DECODER MODE” parameter in “INPUT MENU” to “AUTO”, this unit selects the appropriate digital decoder
according to the input signal.
• The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.
• The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.
• You can change sound field parameters. See page 75 for details.
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 40) and Audio input jack select is set to “ANALOG” (see page 39).
• When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies
the selected program and Audio input jack select is set to “ANALOG” (see page 39).
• When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the
DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.
■ Front panel operations
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the OSD.
■ Remote control operations
Set the operation mode selector to AMP and then
press one of the sound field program selector
buttons on the remote control repeatedly.
The name of the selected sound field program appears in
the front panel display and in the OSD.
SOUND FIELD PROGRAMS
Selecting sound field programs
Notes
INPUT
VOLUME
MAIN ZONE
ZONE 2
ZONE 2
CONTROLS
ON/OFF
ENHANCER
SILENT CINEMA
NIGHT
PHONES
OPTIMIZER MIC
MASTER
ON
OFF
PURE DIRECT STRAIGHT
EFFECT
PROGRAM
TONE CONTROL
AUDIO SELECT
INPUT
ZONE 2
ZONE 2 VOLUME
PRESET/TUNING
FM/AM
SEARCH MODE
EDIT
A/B/C/D/E
CATEGORY
PRESET/TUNING/CH
MEMORY
TUNINIG MODE
DISPLAY
MAN'L/AUTO FM
VIDEO AUX
S VIDEO
VIDEO
AUDIO
L
R
OPTICAL
INPUT
ON/OFF
PROGRAM selector
–
+
+
––
+
ENTER
DISPLAY
AUDI O
MENU
TITLE
TV MUTE
TV INPUT
MUTE
4
3
2
ENT
+
10
0
9
5
1
7
6
8
RETURN
VOLUME
CH
TV VOL
EFFECT
PARAMETER
STRAIGHT
XM MEMORY
A-E/CAT.
SRCH MODE
PURE DIRECT
PRESET/CH
SET MENU
BAND
LEVEL
ENHANCER
STEREO
SUR. DECODE
SELECT
EXTD SUR.
CLASSICAL
LIVE/CLUB
ENTERTAIN
MOVIE
NIGHT
TV
SOURCE
AMP
AMP
Sound field program
selector buttons
01EN_00_HTR-6090_U.book Page 43 Tuesday, June 27, 2006 6:40 PM
- HTR-6090 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- CONTENTS 5
- FEATURES 6
- GETTING STARTED 7
- AUX” as the input source 9
- CONTROLS AND FUNCTIONS 10
- ■ Using the remote control 12
- Front panel display 13
- Rear panel 15
- CONNECTIONS 16
- Connecting speakers 17
- 10 mm (0.4 in) 18
- Speaker terminal wrench 18
- Red: positive (+) 18
- Black: negative (–) 18
- ■ Connecting the banana plug 19
- ■ Conventional connection 20
- ■ Bi-amplification connection 20
- ■ Audio jacks 21
- ■ Video jacks 21
- ■ HDMI jack and cable plug 22
- ■ Audio signal flow 23
- ■ Video signal flow 23
- ■ Connecting a DVD player 25
- ■ Connecting set-top boxes 26
- ■ Connecting audio components 27
- Connecting a YAMAHA iPod 30
- ■ AC OUTLETS (SWITCHED) 32
- Setting the speaker impedance 33
- Turning on and off the power 34
- AUTO SETUP 35
- SET MENU 36
- ■ If an error screen appears 39
- ■ If “WARNING” appears 40
- PLAYBACK 41
- ■ Guide to contents 42
- Selecting audio input jacks 43
- (AUDIO SELECT) 43
- Selecting the MULTI CH INPUT 44
- Using your headphones 44
- Muting the audio output 44
- ■ Canceling the sleep timer 46
- ■ Front panel operations 47
- ■ Remote control operations 47
- ■ For music audio sources 48
- ■ For various sources 49
- ■ For visual sources of music 50
- ■ For movie sources 50
- ■ Stereo playback 51
- STRAIGHT 52
- PURE DIRECT 53
- 2ch Stereo 54
- ENHANCER 55
- ■ Front panel functions 57
- ■ Remote control functions 57
- Automatic tuning 58
- Manual tuning 59
- Automatic preset tuning 60
- Manual preset tuning 61
- Selecting preset stations 62
- Exchanging preset stations 63
- XM SATELLITE RADIO TUNING 64
- Activating XM Satellite Radio 66
- Basic XM Satellite Radio 68
- ■ All Channel Search mode 69
- ■ Category Search mode 70
- ■ Preset Search mode 71
- ■ Direct Number Access mode 72
- PARAMETER 74
- USING iPod 76
- RECORDING 78
- ADVANCED SOUND CONFIGURATIONS 79
- REV.TIME 82
- REV.DELAY 82
- REV.LEVEL 82
- Selecting decoders 83
- ■ Decoder descriptions 84
- ■ Auto setup AUTO SETUP 87
- ■ Manual setup MANUAL SETUP 87
- FRONT SP 91
- CENTER SP 91
- SUR. L/R SP 91
- SB L/R SP 92
- PRESENCE SP 92
- CROSS OVER 92
- 02ASUBWOOFER PHASE 92
- PRIORITY 92
- ■ Speaker level B)SP LEVEL 93
- ■ Test tone D)TEST TONE 94
- ■ Equalizer A)EQUALIZER 94
- ■ Low-frequency effect level 95
- ■ Audio settings D)AUDIO SET 96
- ■ HDMI set E)HDMI SET 96
- 3 INPUT MENU 97
- ■ Volume Trim C)VOLUME TRIM 99
- ■ Multi channel input Setup 99
- 4 OPTION MENU 100
- ■ Zone set F)ZONE SET 103
- ■ Dock set H)DOCK SET 103
- ■ Controlling this unit 104
- ■ Controlling a TV 104
- AUX/DOCK 105
- Setting remote control codes 106
- REMOTE CONTROL FEATURES 107
- ■ MACRO operations 110
- ■ Default macro functions 111
- ■ Clearing function sets 113
- ■ Clearing a learned function 114
- ■ Clearing a macro function 115
- ■ Using external amplifiers 116
- ■ Selecting Zone 2 117
- Front panel 119
- Remote control 119
- CONTROLS 120
- TONE CONTROL 120
- ADVANCED SETUP 121
- ■ Bi-AMP BI-AMP 123
- ■ Video reset VIDEO RESET 123
- (remote control 124
- A-E/CAT 125
- PRESET/CH 125
- ■ General 126
- ADDITIONAL 127
- INFORMATION 127
- TROUBLESHOOTING 128
- ■ XM Satellite Radio 130
- ■ Remote control 131
- ■ AUTO SETUP 132
- RESETTING THE SYSTEM 134
- GLOSSARY 135
- ■ S-video signal 137
- ■ Elements of a sound field 138
- ■ CINEMA DSP 138
- ■ SILENT CINEMA 138
- ■ Virtual CINEMA DSP 138
- ■ Frequency 139
- ■ Q factor 139
- SPECIFICATIONS 140
- APPENDIX-i 141
- APPENDIX-ii 142
- APPENDIX-iii 143
- APPENDIX-iv 144
- APPENDIX-v 145
- LIST OF REMOTE CONTROL CODES 145
- APPENDIX-vi 146
- APPENDIX-vii 147
- APPENDIX-viii 148
- APPENDIX-ix 149
Related products and manuals for Mobile phones Yamaha HTR-6090
Mobile phones Yamaha RX-V1700 User Manual
(141 pages)
(141 pages)
© 2020, manymanuals.com. All rights reserved. | 0.737 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals