Yamaha P-500 User Manual download pdf (Page 172)

User’s Manual 8-13

Optional Devices

Setting for display video on HDMI

To view video on the HDMI device, be sure to configure the following

settings. Otherwise, you may find that nothing is displayed.

Settings for audio on HDMI

To set the audio device to use the HDMI:

1. Click Start J Control Panel J Hardware and Sound J Sound J

Digital Output Device (HDMI) J Set Default Device.

To set the audio device to use the internal speakers:

1. Click Start J Control Panel J Hardware and Sound J Sound J

Speakers J Set Default Device.

i.LINK (IEEE1394)

i.LINK (IEEE1394) is used for high-speed data transfer for a range of

compatible devices such as

1. Digital video cameras

2. Hard disk drives

3. MO drives

4. CD-RW drives

■ When you connect a television or external monitor to the HDMI port

and the display output device is set to HDMI.

When you unplug the HDMI cable and re-plug it in please wait at least

5 seconds before you replug the HDMI cable again.

■ When you connect a television or external monitor to the HDMI port

and you connect the television, external monitor or external sound

device to another port.

When you change the display output or Unplug/re-plug the HDMI

cable.

The sound output device and the display output device maybe changed

automatically by the system.

■ Be Sure to use the FN + F5 hot keys to select the display device before

starting to play video. Do not change the display device while playing

video.

■ Do not change the display device under the following conditions.

■ While data is being read or written.

■ While communication is being carried out.

i.LINK uses a four-pin connector, which does not carry electric current.

External devices will need their own power supply.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 226 227

No comments

Yamaha P-500 User Manual Page 172