Yamaha P-500 User Manual Page 117

  • Download
  • Add to my manuals
  • Print
  • Page
    / 227
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 116
User’s Manual 4-28
Operating Basics
with a 2.6GB single-sided capacity and 5.2GB double-sided capacity.
Other DVD-ROM drives for computers or other DVD players may not be
able to read DVD-R/-RW or DVD+R/+RW discs.
Data written to a CD-R/DVD-R/DVD+R disc cannot be deleted either in
whole or in part.
Data deleted (erased) from a CD-RW, DVD-RW, DVD+RW or DVD-
RAM disc cannot be recovered. Check the content of the disc carefully
before you delete it. If multiple drives that can write data to discs are
connected, be careful not to delete data from the wrong drive.
When writing to a DVD-R/-RW, DVD+R/+RW or DVD-RAM disc, some
disc space is required for file management, so you may not be able to
write the full capacity of the disc.
Since the disc is based on the DVD standard, it might be filled with
dummy data if the written data is less than about 1 GB. Even if you write
only a small amount of data, it might take time to fill in the dummy data.
DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.
When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
Be sure to connect the AC adaptor before you write or rewrite.
Before you enter Sleep Mode/Hibernation Mode, be sure to complete
DVD-RAM writing. Writing is complete if you can eject the DVD-RAM
media.
Be sure to close all other software programs except the writing
software.
Do not run software such as a screen saver, which can put a heavy load
on the CPU.
Operate the computer under the power scheme High Performance. Do
not use power-saving features.
Do not write while virus check software is running. Wait for it to finish
and then disable virus detection programs including any software that
checks files automatically in the background.
Do not use hard disc utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
CD-RW (Ultra speed) media should not be used as data may be lost or
damaged.
Write from the computer's hard disc drive to the CD/DVD. Do not try to
write from shared devices such as a LAN server or any other network
device.
Writing with software other than Corel Movie factory for TOSHIBA is not
recommended.
Page view 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 226 227

Comments to this Manuals

No comments