Yamaha LS9 Owner's Manual download pdf (Page 4)

The Selected Channel section on an LS9 console corresponds to the channels modules on a traditional analog console,

providing access to all of the main parameters for the currently selected channel� The channel to be controlled is selected by

pressing it’s [SEL] key� Head amp gain, EQ, dynamics, pan/balance, mix and matrix bus send level, and other parameters can

be controlled via the encoders and keys on the panel�

Analog Mixer Channel

Module

LS9 Selected Channel

Section

LS9 Channel

Module Section

Note:The analog channel module shown is from the MG24/14 mixer, but since it does not have the same number of AUX and EFF controls as the LS9 it should be referred to only as an example.

The Selected Channel section is located

to the right of the LCD panel.

●

Module Comparison

The channel module controls the parameters shown

in this section of the display. This corresponds to

the lower section of the analog console channel

module, shown to the left.

The Selected Channel section encoders and keys control the parameters that

appear in this section of the display. This includes head amp gain, EQ, two

different dynamics thresholds, panning/balance, and other controls

corresponding to those in the upper section of the analog console channel

module shown to the left. The HPF can be controlled via the display only.

The parameters

for the channel

selected via the

[SEL] keys appear

on the display�

Selected Channel Section

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Yamaha LS9 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Keyboards Yamaha LS9