Yamaha LS9 Owner's Manual download pdf (Page 6)

Mounting EQ or Effect Units

The Virtual Rack

The LS9 has an 8-unit “Virtual Rack�” Rack spaces 1 through 4 can be loaded with 31-band or 15-band graphic EQ units,

while rack spaces 5 through 8 can be loaded with GEQ or SPX multi-effect units� Each 31-band GEQ unit provides 31

independently adjustable bands for a single channel� While the 15-band “Flex15 GEQ” units let you control up to 15 of 31

bands for two channels�

In scene 000 4 GEQ units and 4 effect units are already selected� 8 Virtual Rack spaces are always available in the LS9,

although some of them may be blank in some cases�

GEQ units can be loaded into all 8 rack spaces, and you cal select either the single-channel 31-band GEQ type or the dual-

channel 15-band Flex15 GEQ type� Effect units can only be mounted in rack spaces 5 through 8� You can change the type of

unit mounted in any rack space by following steps 2 and 3 in the procedure described above�

(1) Press the RACK [1-4] and [5-8]

keys in the DISPLAY ACCESS section

simultaneously to open the Virtual Rack

GEQ/Effect display.

(2) Position the cursor at the RACK button

corresponding to the rack you want to access,

and press the [ENTER] key. The RACK

MOUNTER pop-up window will open.

(3) Use the BLANK, 31BandGEQ, Flex15GEQ, and EFFECT

buttons to select the type of unit you want to mount in the selected

rack space, then press the [OK] button. Press the [CANCEL]

button if you want to close the pop-up window without mounting a

GEQ or effect unit.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

Yamaha LS9 Owner's Manual Page 6