Yamaha PJP-50R User Manual download pdf (Page 34)

CONFIGURATIONS

English

To have a meeting in a large conference room or with a large number of persons, some ProjectPhone systems can be

connected as slave units to this system. The number of connectable systems varies depending on the installation

environment.

• In an interlocked connection of the ProjectPhone systems, allow a distance of at least 2 meters between them.

• Set the “Room Size” to “Small” for an interlocked connection.

• If echo or howling is produced, install the ProjectPhone systems at larger distances or decrease their volumes.

• Do not set the volume of the ProjectPhone systems connected as the master or slave units to 0. Otherwise, echo may be produced.

■ Connection

Using stereo mini-plug cables, connect the AUDIO OUT terminal of each ProjectPhone system to the AUDIO IN

terminal of another ProjectPhone system. The following illustration shows an example of an interlocked connection of

three ProjectPhone systems including this system.

■ Setup of the Master unit

Set “External Input/Output” to “Connection (Master)”.

The display shows .

Using the keys on this unit

In the initial display, select “Menu” → “Settings” → “Sound

Settings” → “External I/O” → “Connection(mstr)”.

Using the Web menu

In the Web menu, select “External Input/Output” →

“Connection (Master)”.

■ Setup of the Slave units

Set “External Input/Output” to “Connection (Slave)”. The

display shows .

Using the keys on this unit

In the initial display, select “Menu” → “Settings” → “Sound

Settings” → “External I/O” → “Connection(slv)”.

Using the Web menu

In the Web menu, select “External Input/Output” →

“Connection (Slave)”.

Interlocked Connection of ProjectPhone Systems

LINE LAN DC IN 12V IN AUDIO OUT

Master unit (This system) Slave unit Slave unit

Connect the master

unit to the network

or an analog

telephone circuit.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 52 53

No comments

Yamaha PJP-50R User Manual Page 34