Yamaha PJP-50R User Manual download pdf (Page 11)

Preparation Procedure

Set up the system according to the network or telephone circuit to which the system is connected.

Communication through the Internet or LAN

The setup items are variable depending on whether or not the DHCP server is used.

When using the DHCP server:

See “LAN: Acquiring the network information from a DHCP server” (page 6).

When not using the DHCP server:

See “LAN: Setting the network information manually” (page 6).

Communication through the public switched telephone circuit

See “Telephone circuit: Setting the telephone circuit type” (page 10).

■ LAN: Acquiring the network information

from a DHCP server

When this unit is used in a network containing a DHCP

server, no setting operation is required since the DHCP

server assigns all of the necessary network information

automatically.

To check if the correct network information

is obtained

Confirm that the IP address of this unit is displayed in the

initial display as shown below.

If the IP address display is “???.???.???.???”

The network information has not been obtained correctly.

■ LAN: Setting the network information

manually

Follow the procedure below to register the network

information manually.

Before setting the network information, check that this unit is

connected properly to the network. If the LED of the LAN port is

not lit, this system is not connected properly to the network.

The factory settings of the network information are as follows.

– IP address: 192.168.100.200

– Subnet mask: 255.255.255.0

– Default gateway: 0.0.0.0

– DNS server: 0.0.0.0

Step 2: Registering the settings of this unit

IP: 192.168.100.200

Menu :Address

IP: ???.???.???.???

Note

MIC MUTE

HOOK

/STANDBY

VOL

Numeric keys

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 52 53

Comments to this Manuals

No comments

Yamaha PJP-50R User Manual Page 11

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Yamaha PJP-50R