Yamaha PWK-242 Owner's Manual download pdf (Page 6)

(1) Insert the hooked section on the top of the plasma monitor mounting bracket into the notch in the

top of the wall mounting unit and pull it down.

(2) Use 2 M6x18 screws inserted through the holes in the underside of the mounting bracket to

attach it ﬁrmly to the wall mounting unit.

(3) Check that the plasma monitor is ﬁrmly attached to the wall, then connect the cables.

Note

Connect speaker cables to the speaker terminals on the rear of the plasma

monitor prior to mounting it in the wall mounting unit. Connect the speaker

cables to the speakers after mounting the monitor in the mounting unit. For

instructions on attaching the speakers, refer to the speaker owner’s manual.

Weight : 2.5 kg (5 lbs. 8 oz.)

Main construction material : Steel plate

Surface treatment : Black electrostatic painting

Angle adjustment: Vertical screen position

Mounting the plasma monitor to the wall mounting unit

Check that the

hooked section is

ﬁrmly seated in the

wall mounting unit.

• Always use at least 2

people to carry the

plasma monitor.

• Remove all the cables

and cords from the

plasma monitor before

mounting it in the wall

mounting unit.

Notch

Wall mounting unit

Hooked section

2 M6x18 screws

Plasma monitor

mounting bracket

Item speciﬁcations

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

No comments

Yamaha PWK-242 Owner's Manual Page 6