Yamaha SX200C Owner's Manual download pdf (Page 84)

4-21

001392

EMU01460

CHANGING GEAR OIL

8 Be sure the outboard is securely fas-

tened to the transom or a stable stand.

You could be severely injured if the out-

board falls on you.

8 Never get under the lower unit while it

is tilted, even when the tilt-support

lever/knob is locked. Severe injury

could occur if the outboard accidentally

falls.

1) Tilt the outboard motor so that the oil

drain plug is at the lowest point possi-

ble.

2) Place a suitable container under the

gear-case.

3) Remove the oil drain plug 1.

NOTE:

The oil drain plug is magnetic. Remove all

metal particles from the plug before rein-

stalling it.

4) Remove the oil level plug 2 to allow

the oil to drain completely.

Inspect the used oil after it has been

drained. If the oil is milky, water is get-

ting into the gear-case which can cause

gear damage. Consult a Yamaha dealer

for repair of the lower unit seals.

NOTE:

For disposal of used oil consult your

Yamaha dealer.

67K-9-15-4 2/28/03 9:15 Page 22

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 117 118

No comments

Yamaha SX200C Owner's Manual Page 84