Yamaha F115C Owner's Manual download pdf (Page 80)

4-17

3) Put a new gasket on the drain bolt.

Apply a light coat of oil to the gasket

and reinstall the drain bolt.

NOTE:

If a torque wrench is not available when

you are installing the drain plug, finger

tighten the bolt just until the gasket

comes into contact with the surface of the

drain hole. Then tighten 1/4 - 1/2 turn.

Have the drain plug torqued to the correct

value with a torque wrench as soon as

possible.

4) Remove the oil filler cap 2. Add the

correct amount of oil through the

filler hole.

Reinstall the filler cap.

5) Start the engine and watch to make

sure the low oil pressure warning

lamp turns off. Make sure that there

are no oil leaks.

If the oil lamp does not turn off, or if

there are oil leaks, stop the engine and

find the cause. Continued operation with

a problem could cause severe engine

damage. If the problem cannot be found

and corrected, consult your Yamaha deal-

er.

Engine oil grade/capacity:

Refer to “SPECIFICATIONS”, page 4-1.

000310

Tightening torque:

Refer to “SPECIFICATIONS”, page 4-1.

68V-9-14-4 3/11/03 19:35 Page 18

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 115 116

No comments

Yamaha F115C Owner's Manual Page 80