Yamaha 8A Owner's Manual download pdf (Page 27)

Components

22

difficult to steer, which could result in an

accident.

EMU26261

Trim rod (tilt pin)

The position of the trim rod determines the

minimum trim angle of the outboard motor in

relation to the transom.

EMU26280

Shallow water lever

Pushing this lever down will tilt the motor up

partially to provide more clearance when op-

erating in shallow water.

EMU26321

Tilt support knob

To keep the outboard motor in the tilted up

position, push the tilt support knob under the

swivel bracket.

NOTICE

ECM00660

Do not use the tilt support lever or knob

when trailering the boat. The outboard

motor could shake loose from the tilt sup-

port and fall. If the motor cannot be trail-

ered in the normal running position, use

an additional support device to secure it

in the tilt position.

EMU26373

Cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the

cowling lock lever(s) and lift off the cowling.

When installing the cowling, check to be sure

it fits properly in the rubber seal. Then lock

the cowling again by returning the cowling

lock lever(s) to the lock position.

ZMU02853

ZMU02854

1. Cowling lock lever(s)

ZMU02855

ZMU02862

1

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Comments to this Manuals

No comments