Yamaha 8A Owner's Manual download pdf (Page 44)

Operation

39

3. Place the tilt lock lever (if equipped) in

the release/up position.

4. Pull up the shallow water lever (if

equipped).

5. Hold the rear of the top cowling with one

hand and tilt the engine up fully.

6. Push the tilt support knob into the clamp

bracket. Or the tilt support bar will turn to

the lock position automatically.

NO-

TICE:

Do not use the tilt support lever

or knob when trailering the boat. The

outboard motor could shake loose

from the tilt support and fall. If the

motor cannot be trailered in the nor-

mal running position, use an addi-

tional support device to secure it in

the tilt position. For more detailed in-

formation, see page 41.

[ECM01641]

EMU28013

Procedure for tilting down (manual

tilt models)

1. Slightly tilt the engine up.

2. On models equipped with a tilt support

knob, pull it out.

3. Slowly tilt the engine down.

EMU28061

Shallow water

EMU28073

Cruising in shallow water (manual tilt

models)

WARNING

EWM01781

●

Run the boat at the lowest possible

speed when using the shallow water

cruising system. The tilt lock mecha-

nism does not work while the shallow

water cruising system is being used.

Hitting an underwater obstacle could

cause the outboard motor to lift out of

ZMU02854

ZMU02887

ZMU02888

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Comments to this Manuals

No comments