Yamaha DVD-S661 Owner's Manual download pdf (Page 27)

25 En

Setup Menu

Setting the analog output

Set the analog output to match the playback

capability of this unit.

1 In “AUDIO SETUP PAGE”, press 5 /a to

highlight [ANALOG OUTPUT], and then

press 3.

STEREO

Select this to change channel output to stereo,

which only delivers sound from the two front

speakers.

LT/RT

Select this if this unit is connected to a Dolby

Pro Logic decoder.

2 Press 5 /a to select a setting, and then

press ENTER.

Setting the digital output

The [DIGITAL AUDIO] options are:

[DIGITAL OUTPUT] and [LPCM OUTPUT].

1 In “AUDIO SETUP PAGE”, press 5 /a to

highlight [DIGITAL AUDIO], and then

press 3.

2 Press 5 /a to highlight an option.

3 Press 3 to open a submenu.

DIGITAL OUTPUT

Set the digital output according to your

optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital

audio output jack to a multi-channel decoder/

receiver.

MPEG ➜ PCM

Select this if your receiver is not capable of

decoding MPEG audio signals.

PCM ONLY

Select this only if your receiver is not capable

of decoding multi-channel audio signals.

LPCM OUTPUT

Select this if you have connected this unit to a

PCM-compatible receiver via a digital

terminal, such as the coaxial terminal. In this

case, you may need to adjust [LPCM

OUTPUT].

Discs are recorded at a certain sampling rate.

The higher the sampling rate, the better the

sound quality.

48KHz

Select this to play back discs recorded at the

sampling rate of 48 kHz. All 96 kHz PCM data

streams (if available) are converted to the

sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the

sampling rate of 96 kHz. If the 96 kHz disc is

copy protected, the digital output is

automatically converted to the sampling rate of

48 kHz.

4 Press 5/a to select a setting, and then

press ENTER.

Turning the HDMI audio on/off

When you connect this unit to an HDMI

compatible component via the HDMI jack,

select to turn on or off the HDMI audio output.

1 In “AUDIO SETUP PAGE”, press 5/a to

highlight [HDMI AUDIO], and then

press 3 .

ON

Select this to turn on the HDMI audio output.

OFF

Select this to turn off the HDMI audio output.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Comments to this Manuals

No comments