Yamaha DVD-S1500 Owner's Manual download pdf (Page 17)

English

On-screen menu

TV System (NTSC/PAL conversion)

Allows you to select [PAL], [NTSC] or [Auto] mode to

match your TV system. You can play PAL discs on NTSC

monitor, and NTSC discs on PAL monitor.

Choices: PAL, NTSC, Auto

The following conversions are supported.

Notes:

– In progressive scan mode, the output signals from the

VIDEO and S VIDEO jacks are same as the format of the

disc you play.

– Some image distortion occurs when switching the NTSC

and PAL mode.

– If your TV does not accept the selected mode while you

change the [TV System] setting, the screen will be

distorted so that you cannot recognize the On-screen

menu. When it occurs, you can change the [TV System]

settings by the remote control operations. Follow the

procedures below.

• Choosing [PAL]:

Press PLAY (u)/2/5/6/PLAY (u) on the remote control.

• Choosing [NTSC]:

Press PLAY (u)/2/5/7/PLAY (u) on the remote control.

Audio Menu

Digital output

Enables you to specify the type of digital output to suit

your AV receiver. Select [PCM only] if your receiver is not

capable of decoding multi-channel audio.

Select [All] if you connected this unit’s digital out jacks to

a multi-channel decoder receiver.

Choices: Off, PCM only, All

Initial setting: All

Note:

– Digital output is not available for SA-CDs.

Analog output

Enables you to specify the type of analog output suitable

for your AV receiver.

Choices: Stereo, DolbysurrCompat, 3D sound,

Multi-channel

Initial setting: Multi-channel

Stereo:

In this setting, the multi-channel audio is down-

mixed to a stereo signal. Select this setting when

connecting to a TV, stereo amplifier/ receiver, etc.

DolbysurrCompat:

Select this setting when using

equipment with a Dolby Surround Pro Logic decoder. In

this setting, the multi-channel audio (Dolby Digital,

MPEG-2, DTS) is downmixed to a Dolby Surround-

compatible 2-ch output. SA-CD and PCM signals with a

sampling frequency of over 88.2 kHz are downmixed to

normal stereo.

3D sound:

In a setup without rear speakers (analogue

stereo output), 3D Sound remixes the six channels of

digital surround (except for SA-CD and PCM signals with

a sampling frequency of over 88.2 kHz) into a two

speaker output while retaining all of the original audio

information. The result is the sensation of being

surrounded by multiple speakers.

Multi-channel:

Select this setting when using a multi-

channel AV receiver with 6-ch discrete inputs. The multi-

channel audio signals those of like DVD-Audio, DVD-

Video, and SA-CD are output from the respective 6-ch

discrete output jacks. In this mode, this unit will perform

DTS decoding, Dolby Digital 5.1-channel decoding, or

MPEG Multichannel decoding when applicable, and

Dolby Pro Logic II decoding on 2-ch sound tracks except

for SA-CD and PCM signals with a sampling frequency of

over 88.2 kHz.

PCM output

Enables you to select PCM digital output at 48 kHz or

96 kHz. If you select [48 kHz], PCM data will be

converted to 2-ch 48 kHz or less. Select [48 kHz] if the

connected equipment cannot process signals with a

sampling frequency of 96 kHz or 88.2 kHz.

Choices: 96 kHz, 48 kHz

Initial setting: 96 kHz

Note:

– Signals are converted to either 48 kHz or 44.1 kHz

despite the above settings if the disc has copy protection.

– If you select [96 kHz], signals with a sampling frequency

of over 96 kHz are converted to 2-ch 88.2 kHz or

96 kHz.

Disc

Format

Output format

Selected mode

NTSC PAL AUTO

NTSC NTSC PAL NTSC

PAL NTSC PAL PAL

Widescreen

4:3 letterbox

4:3 panscan

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Yamaha DVD-S1500 Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for DVD players Yamaha DVD-S1500