Yamaha DV-SL100 Owner's Manual download pdf (Page 26)

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not

listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power

cord, and contact the nearest authorized YAMAHA dealer or service center.

Problem Solution

No power

– Check if the AC power cord is properly connected.

No picture

– Check if the TV is switched on.

– Check the video connection.

– If you did not use Progressive Scan connections (using the Y PB PR jacks on the

DVD Player) and you do not have a picture at the TV, please follow the steps below

to turn off Progressive Scan;

1. Press

(OPEN/CLOSE) to open the disc tray.

2. Press

3. Then press MUTE to deactivate the Progressive. The DVD Player will reset itself

to Component/Interlaced video. The disc tray will closed automatically to let you

know it has reset itself.

Distorted picture

– The disc is badly scratched or dirty.

– Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

Completely distorted picture or

black/white picture with DVD or

Video CD

– Make sure the PAL/NTSC setting at the DVD player matches the video signal of

your television. (See PAL/NTSC CONVERSION)

No sound or distorted sound

– Adjust the volume.

– Check that the speakers are connected correctly.

No audio at digital output

– Check the digital connections.

– Check if your receiver can decode MPEG-2 or DTS and if not, please make sure

the digital output is set to PCM.

– Check if the audio format of the selected audio language matches your receiver

capabilities.

Disc can’t be played

– The DVD+R/DVD+RW/DVD-R/DVD-RW/CD-R/CD-RW must be finalized.

– Ensure the disc label is facing up.

– Check if the disc is defective by trying another disc.

– If you have recorded this particular JPEG CD or MP3 CD yourself, please ensure

that your disc contains at least about 6~10 pictures or 3~5MP3 music tracks before

using it with the player.

No return to start-up screen when

disc is removed

– Reset the unit by switching the player off, then on again.

The player does not respond to the

remote control

– Aim the remote control directly at the sensor on the front of the player.

– Reduce the distance to the player.

– Replace the batteries in the remote control.

– Insert the batteries with their polarities (+/– signs) as indicated.

Buttons do not work

– In order to completely reset the player, unplug the AC cord from the AC outlet.

Player does not respond to some

operating commands during

playback

– Operations may not be permitted by the disc. Refer to the instructions of the disc.

Troubleshooting

SL100_G02_eng(3139 246 13251) Page 22 Tuesday, October 14, 2003 6:47 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 185 186

Comments to this Manuals

No comments

Yamaha DV-SL100 Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for DVD players Yamaha DV-SL100