Yamaha M7CL User's Guide download pdf (Page 47)

Yamaha Professional Audio M7CL StageMix V5.1 User Guide

Page 47

9.14 Display Key Input for Dynamics Meters

When this preference is ON, the input meters displayed in the Dynamics

Processor thumbnails in the Mixer window will show the level of the Key Input

signal for every Dynamics Processor. If this preference is Off, the input signal

going into the Dynamics Processors will be displayed.

9.15 RTA Peak Hold Mode

An RTA Hold function is available in the PEQ and GEQ editing screens. The

mode for this function is selected in the Setup screen.

Freeze

When this mode is selected, the RTA display will “freeze” at the moment the

[RTA Hold] button is pressed.

All Peaks

When this mode is selected, the highest level for each RTA frequency band

will be displayed in red, behind the current RTA levels which are displayed in

grey.

High Peak

When this mode is selected, only the frequency band which has been

measured at the highest level will be displayed in red, behind the current RTA

levels which are displayed in grey.

9.16 RTA Input Gain

Input Gain or Attenuation can be applied to the RTA input signal in order to

allow the range of the RTA to be more usefully displayed within the PEQ or

GEQ editing screens. The following gain levels are available:

• -24dB

• -12dB

• 0dB

• 12dB

• 24dB

9.17 RTA Number of Bands

The number of bands displayed in the RTA can be selected as either 61-band

or 121-band.

1 2 ... 42 43 44 45 46 47 48 49 50 51

No comments

Yamaha M7CL User's Guide Page 47