Yamaha M7CL User's Guide download pdf (Page 5)

Yamaha Professional Audio M7CL StageMix V5.1 User Guide

Page 5

1.0 System Requirements

• Apple iPad (any model using iOS 6 or higher)

• Yamaha M7CL digital mixing console with V3.5 firmware or higher

• Wi-Fi access point (preferably with 802.11n, 5GHz capability, though 2.4GHz

and 802.11g will also work)

• CAT5 cable (to connect the console to a Wi-Fi access point)

• iOS: iOS 6.0 - 8.x

2.0 Wi-Fi Settings

Configure the Wi-Fi access point, following the manufacturer’s instructions. No

special settings are needed, but using security such as WPA is highly recommended,

to prevent unwanted devices from joining the network. Here are some suggested

settings to assist less experienced Wi-Fi users:

1. Give the wireless network a name (this is the “SSID”).

2. Choose a security mode (such as WPA) and password.

3. Select the wireless mode (802.11g or n).

4. In the case of “n”, select the wireless band (2.4 or 5GHz).

5. If available, enable “Auto Channel Selection” so the wireless channel with the

least interference will be selected.

802.11n networks at 5GHz are preferred because they allow faster communication

between the iPad and the Wi-Fi access point. Practically, this could result in more

accurate level metering with the StageMix app. Using a Wi-Fi access point with 2 or

more external aerials is recommended to increase potential signal range. Booster

aerials could be connected for a further increase in performance.

1 2 3 4 5 6 7 8 9 10 ... 50 51

No comments

Yamaha M7CL User's Guide Page 5