Yamaha YDP-162 Owner's Manual download pdf (Page 30)

YDP-162/142 Owner’s Manual

Appendix

ENGLISH

6 Connect the pedal cord and the AC power

adaptor.

6-1 Insert the pedal cord plug to the pedal connector

from the rear.

6-2 Attach the cord holders to the rear panel as

shown, then clip the cord into the holders.

6-3

Use a vinyl tie to take up any slack in the pedal cord.

6-4 Insert the DC plug of the AC power adaptor into

the DC IN jack.

7 Set the adjuster.

Rotate the adjuster until it comes in firm contact with

the floor surface.

8 Attach the headphone hanger. (YDP-162 only)

Use the included two screws (4 x 10 mm) to attach the

hanger as shown in the illustration.

■ After completing the assembly, please

check the following.

■ Connecting the pedal cord

Insert the pedal cord securely until the metal part of the

cord plug disappears from view. Otherwise, the pedal

may not function properly.

6-1

6-3

6-2

6-4

Insert the cord all the

way until the metal part

of the plug disappears

from view.

• Are there any parts left over?



Review the assembly procedure and correct any

errors.

• Is this instrument clear of doors and other movable

fixtures?



Move the instrument to an appropriate location.

• Does this instrument make a rattling noise when you

shake it?



Tighten all screws.

• Does the pedal box rattle or give way when you step

on the pedals?



Turn the adjuster so that it is set firmly against the

floor.

• Are the pedal and power cords inserted securely into

the sockets?



Check the connection.

• If the main unit creaks or is otherwise unsteady when

you play on the keyboard, refer to the assembly

diagrams and retighten all screws.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Yamaha YDP-162 Owner's Manual Page 30

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha YDP-162