Yamaha DGX-202 Specifications Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
MIDI Functions
67
MIDI is an acronym that stands for Musical Instrument Digital Interface, which
allows electronic musical instruments to communicate with each other, by send-
ing and receiving compatible Note, Control Change, Program Change and various
other types of MIDI data, or messages.
The DGX-202 can control a MIDI device by transmitting note related data and
various types of controller data. The DGX-202 can be controlled by the incoming
MIDI messages which automatically determine tone generator mode, select MIDI
channels, voices and effects, change parameter values and of course play the
voices specified for the various parts.
MIDI messages can be divided into two groups: Channel messages and System
messages. Below is an explanation of the various types of MIDI messages which
the DGX-202 can receive/transmit.
Channel Messages
The DGX-202 is an electronic instrument that can handle 16 channels. This is
usually expressed as “it can play 16 instruments at the same time.” Channel mes-
sages transmit information such as Note ON/OFF, Program Change, for each of
the 16 channels.
System Messages
This is data that is used in common by the entire MIDI system. System messages
include messages like Exclusive Messages that transmit data unique to each
instrument manufacturer and Realtime Messages that control the MIDI device.
The messages transmitted/received by the DGX-202 are shown in the MIDI
Implementation Chart on page 90.
Message Name
DGX-202 Operation/Panel Setting
Note ON/OFF Messages which are generated when the keyboard is played. Each
message includes a specific note number which corresponds to the
key which is pressed, plus a velocity value based on how hard the
key is stuck.
Program Change Voice number (along with corresponding bank select MSB/LSB set-
tings, if necessary).
Control Change Messages that are used to change some aspect of the sound (mod-
ulation, volume, pan, etc.).
Message Name
DGX-202 Operation/Panel Setting
Exclusive Message Reverb/chorus/DSP settings, etc.
Realtime Messages Start/stop operation
MIDI Terminals
In order to exchange MIDI data between multiple
devices, each device must be connected by a cable.
The MIDI terminals of the DGX-202 are located on the
rear panel.
MIDI IN Receives MIDI data from another MIDI device.
MIDI OUT Transmits the DGX-202s keyboard information as MIDI data
to another MIDI device.
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 97 98

Comments to this Manuals

No comments