Yamaha DPX-830 Owner's Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
28
Selecting the color temperature (COLOR TEMP.)
You can select a preset color temperature (white tone) using the menu (see page 23).
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the or button.
3. Select your desired color temperature by pressing the or button.
To exit from the menu:
4. Press the MENU button several times.
Customizing the color temperature (COLOR TEMP.)
To customize and store the color temperature, carry out the following procedure.
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the or button to select CUSTOM .
3. Press the ENTER button.
The COLOR TEMP. - CUSTOM menu appears as shown.
4. Press the or button to select an item from
CONTRAST R (red), CONTRAST G (green),
CONTRAST B (blue), BRIGHTNESS R (red),
BRIGHTNESS G (green), and BRIGHTNESS B (blue).
5. Press the or button to adjust the value of each
item.
6. Repeat step 4 and 5 for optimum adjustment results.
To exit from the menu:
7. Press the MENU button several times.
To activate the stored color temperature settings:
1. Press C.TEMP on the remote control.
The current setting appears.
2. Press the or button to select CUSTOM .
To exit from the menu:
3. Press the C.TEMP button on the remote control.
About color temperature
There are different kinds of white color. Color temperature is a way to show the differences in white. With the higher color temperature, white
area of the image appears reddish, with the lower color temperature, white area of the image appears bluish. This projector adjusts the color
temperature by changing the values of the blue and red contrasts.
To raise the color temperature:
Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature:
Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
Important
If you set all of CONTRAST R, G and B to negative value, the original brightness of the image can not be obtained even
when you maxmize CONTRAST in the IMAGE menu.
COLOR TEMP. - CUSTOM
0
1
0
CONTRAST R
CLAMP WIDTH
BRIGHTNESS B
0
CONTRAST G
0
CONTRAST B
0
BRIGHTNESS R
0
BRIGHTNESS G
COLOR TEMP. : NATIVE
COLOR TEMP. : CUSTOM
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

Comments to this Manuals

No comments