NAMES OF PARTS AND THEIR FUNCTIONS
4 En
X Rear panel (Connecting antennas)
1 FM antenna (supplied)
2 AM antenna terminal: Connect the supplied AM
antenna.
3 FM antenna terminal: Connect the supplied FM
antenna.
4 AUX: Connect an external device. (☞ P. 12)
5 CLOCK
SET: Adjusts the clock. (☞ P. 6)
ON: Displays the current time when system is off.
OFF: Switches the system to power save mode
when system is off.
All the information on the front panel display is
turned off in this mode. This can reduce power
consumption.
y
Even in system off/power save mode, the alarm function
is available.
6 Power cable: Connect to a wall outlet.
• The antenna should be stretched out.
• If you use an outdoor antenna instead of the supplied FM
antenna, reception will be better.
• If radio reception is poor, change the height, direction, or
placement of the antenna.
• If you use an FM antenna that is not supplied with the unit,
make sure that the base of the antenna is not threaded.
Assembling AM antenna
• Place the antenna in a location with good signal reception.
• Digital devices located near the antenna may affect signal reception.
OFFSET ON
23 4 5
1
6
Notes
The wires of the AM antenna have no polarity.
Press and hold Insert Release
Notes
Comments to this Manuals