Yamaha CD-S700 Owner's Manual download pdf (Page 11)

English

7 En

PREPARATION

• Before making any connection, switch OFF the power to the unit, the amplifier and any other component.

• Connections should be made to the correct input terminals of the amplifier or another component.

• If the placement of this unit causes noise to another equipment, such as a tuner, move them further away from each

other.

To connect this unit to your amplifier, choose one of the ways listed below.

When the ANALOG OUT terminals of this

unit are used ( )

Connect these terminals to the CD (or AUX) terminals of

the amplifier by using a supplied RCA stereo cable. For

details concerning these connections, refer to the

operation instructions of the amplifier being used.

• Be sure that the left (L) and right (R) of these terminals

are connected to the corresponding (left and right)

terminals of the amplifier or other component.

When the DIGITAL OUT (OPTICAL) terminal

of this unit is used ( )

Connect this terminal to the optical input terminal of an

amplifier with a commercially available optical cable.

• Use a reliable optical cable.

When the DIGITAL OUT (COAXIAL) terminal

of this unit is used ( )

Connect this terminal to the digital input terminal of an

amplifier with a commercially available coaxial cable.

CONNECTIONS

Connecting your amplifier

CAUTION

Coaxial cableOptical cable

Amplifier

RCA stereo

cable

(supplied)

• The digital output is turned off when this unit is in PURE DIRECT mode.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

Yamaha CD-S700 Owner's Manual Page 11