Yamaha NP-S303 Owner's Manual download pdf (Page 20)

Select a connection method that is suitable for your environment.

This section describes how to use the MusicCast CONTROLLER app to connect the

unit to a wireless network.

If you want to connect the unit to a wireless network without using MusicCast

CONTROLLER, refer to page 22 for more information. To use MusicCast CONTROLLER

while the unit is connected to a network by cable, perform Steps 1 through 4 in the

section “Connecting to a network using MusicCast CONTROLLER”.

The following functions are available only if you use the MusicCast CONTROLLER app.

• Playback music from music streaming services.

• Sending signals via Bluetooth (page 36)

NOTE

• If you want to play high-resolution audio sources via the network, a wired connection is

recommended for more stable playback (page 18).

• Your mobile device must already be connected to the wireless LAN router (access point).

• To manually connect the unit to a network wirelessly, have the SSID and security key for the

wireless router (access point) ready.

Connecting to a network by using MusicCast CONTROLLER

This section explains how to register the unit with MusicCast and set up the unit for the

network connection.

Install MusicCast CONTROLLER.

Download and install the MusicCast CONTROLLER app (free) to your mobile

device from the App Store or Google Play.

Start the MusicCast CONTROLLER app on your mobile device, and

then tap “Setup”.

Follow the instructions on the display of the mobile device to operate

MusicCast CONTROLLER, and then press and hold down the

CONNECT on the front panel of the unit for 5 seconds.

“CONNECT” appears on the display and the WiFi indicator blinks.

5 Connecting the unit to the network

USB

BLUETOOTH

RETURNSOURCE

CONNECT

SELECT

PUSH

ENTER

Wi-Fi indicator CONNECT

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

No comments

Yamaha NP-S303 Owner's Manual Page 20