Yamaha YSP-4300 Owner's Manual Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
Advanced setup
67 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Menu Description Selectable item/Adjustable range
TURN ON VOLUME Sets the volume level at power-on. OFF* (Not set), 1 to 70
MAX VOLUME Sets the maximum volume level. 1 to 99, MAX* (Maximum)
INPUT LOCK Enables/disables the INPUT key on the front panel. ON (Disabled), OFF* (Enabled)
PANEL LOCK Enables/disables the keys on the front panel. ON (Disabled), OFF* (Enabled)
R.INPUT POWER Enables/disables power-on by remote control input
selector keys when the unit is in the standby mode.
ON (Enables power-on), OFF* (Disables power-on)
AC ON STANDBY Sets whether or not this unit returns to its previous
state when AC power is restored after a temporary
power loss.
ON* (Enters standby mode),
OFF (Restores the state before power was lost)
MEMORY PROTECT Protect system memory 1/2/3 (p. 28). ON (Protect is performed),
OFF* (Protect is not performed)
YRB FL
4)
Use the YRB-100 reflection board for the front left
channel.
YES (The reflection board is used),
NO* (The reflection board is not used)
YRB FR
4)
Use the YRB-100 reflection board for the front right
channel.
YES (The reflection board is used),
NO* (The reflection board is not used)
YRB SL
4)
Use the YRB-100 reflection board for the surround
left channel.
YES (The reflection board is used),
NO* (The reflection board is not used)
YRB SR
4)
Use the YRB-100 reflection board for the surround
right channel.
YES (The reflection board is used),
NO* (The reflection board is not used)
FW UPDATE Confirm firmware version/update firmware. 02.00.04* (The firmware version is displayed)
5)
,
START OK? (Firmware is updated)
INITIALIZE
6)
Resets all settings to their default values. OK (All settings are restored to their default values),
CANCEL* (Settings are not restored to their default
values)
When a menu for the YRB settings is selected, on-screen instructions for
installing the reflection board is displayed. See documentation provided
with the YRB-100 for instructions on installing the YRB-100.
“02.00.04” is an example of firmware version display in the advanced
setup menu.
When the unit freezed, the problem may solve by restoring to their
default values.
4) y 5) y
6) y
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 79 80

Comments to this Manuals

No comments