Yamaha YHT-394 Owner's Manual download pdf (Page 52)

En 52

SETUP

Setting various functions (Setup menu)

■

Generating test tones

Turns the test tone generator on or off.

■ Adjusting the graphic equalizer

When “EQ Select” is displayed, use jCursor D / E

to select “GEQ” and press jENTER.

Check that “Channel” selects and use jCursor D

/ E to select the speaker for which you want to

adjust the equalizer.

SL SR

Channel;FRNT L

GEQ

VOL.

The speaker you are adjusting

Press jCursor C repeatedly to select the

frequency you want to adjust, then use jCursor D

/ E to adjust the volume.

Raising volume: Press jCursor E.

Lowering volume: Press

jCursor D.

When you have finished making adjustments,

press iSETUP to close the Setup menu.

SL SR

63Hz

GEQ

VOL.

Frequency band Setting the volume level for the

selected frequency

Frequency

range

63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/

16 kHz

Adjustable

range

-6.0 dB to 0 dB to +6.0 dB

Default setting 0 dB

Adjustment

increments

0.5 dB

You can use jCursor B / C to select another frequency or

return to step 2. Repeat steps 2-3 to adjust the tone to your

liking.

Test Tone

Off (Default) Does not generate test tones.

On Generates test tones. While “On” is selected, test

tones are produced constantly.

You can use the test tone in a variety of circumstances. For

example, you can adjust the volume balance settings for each

speaker, or whenever you adjust the settings on the internal

graphic equalizer, you can listen to the actual effect while

operating this unit. Turn the test tone off when you have finished

making adjustments.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 109 110

Comments to this Manuals

No comments

Yamaha YHT-394 Owner's Manual Page 52

Comments to this Manuals

Related products and manuals for AV receivers Yamaha YHT-394