Yamaha RX-V667 Owner's Manual download pdf (Page 89)

SETUP

Setting various functions (Setup menu)

En 89

■

Setting the startup volume

Initial Volume

Sets the initial volume for when this receiver is turned on. When

this parameter is set to “Off,” the volume is set at the level when the

receiver last entered standby mode. J1

■

Adjusting DSP effect and volume level

Adaptive DSP Level

Automatically adjust the level of DSP effect in conjunction with

the volume level.

Setting this unit’s video output function

Video Setup items

■

Analog-to-analog video conversion

Analog to Analog Conversion

Enables or disables video conversion between analog video jacks.

Adjustable range Off, Mute, -80 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

Off Disables automatic adjustment of the level of DSP

effect.

On (Default) Adjusts the degree of DSP effect in conjunction with

volume level. The higher the volume level, the less the

DSP effect applied. The lower the volume level, the

greater the DSP effect applied.

Analog to Analog

Conversion

Enable or disable video conversion between analog

video jacks.

Processing Enable or disable adjustment of resolution and aspect

ratio for video signal converted to HDMI video.

Off Disables video conversion between analog video

jacks.

On (Default) Enables video conversion between analog video jacks.

• Analog-to-HDMI video conversion is always possible unless

video signals are being input at the HDMI input jacks or 1080p-

resolution analog video signals are being input (☞

p. 115).

• This unit does not convert 480 line video signals and 576 line

video signals interchangeably.

• 480p-, 576p-, 1080i- and 720p-resolution video signals can not

be output at the VIDEO MONITOR OUT jack (☞

p. 115).

• The converted video signals are only output at the MONITOR

OUT jacks.

• When composite video signals from a VCR are converted into

component video signals, the picture quality may suffer

depending on your VCR.

• Unconventional signals input at the composite video jacks cannot

be converted or may be output abnormally. In such cases, set

“Analog to Analog Conversion” to “Off.”

1 : When you set “Max Volume” at a lower level than “Initial Volume,” “Max

Volume” has priority.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 143 144

Comments to this Manuals

No comments

Yamaha RX-V667 Owner's Manual Page 89

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V667