Yamaha RX-V467 Quick Start Guide download pdf (Page 6)

- 6 -

Set up the speaker parameters automatically (YPAO)

When connection is  nished, adjust the status, sizes, and volume balance of the

speakers to provide an optimal sound  eld. This unit is equipped with a YPAO

(Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker

balance automatically with a simple procedure.

When you use YPAO, a test tone will be output from the speakers for approximately 3 minutes and acoustic measuring will be performed.

When using YPAO, be careful of the following.

The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby. •

Please take care that the test tone does not frighten any small children. •

Check the following before using YPAO.

This unit

The headphones are removed.•

Subwoofer

The power is turned on. •

Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum. •

Subwoofer examples

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Place the supplied YPAO microphone at ear height in your listening position.

YPAO microphone

When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a

microphone stand. When using a tripod, use the tripod screws to  x the microphone in place.

Press RECEIVER A on the remote control to switch this unit on.

Continues to

the next page

RX-V467_QRG_English.indd 6 2010/1/26 13:02:19

1 2 3 4 5 6 7 8

No comments

Yamaha RX-V467 Quick Start Guide Page 6