Yamaha RX-V467 Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 91
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
En 54
SETUP
Setting various functions (Setup menu)
Auto-adjusting Dolby Digital and DTS
dynamic range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
Setting the maximum volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
Setting the startup volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode. J1
Setting HDMI functions
HDMI Setup submenu
D.Range
Min/Auto (Min) Sets the dynamic range suitable for low volume
or a quiet environment, such as at night, for bitstream
signals except for Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD
signals based on input signal information.
STD Adjusts the dynamic range for optimum volume for
regular home use.
Max (Default) Produces audio without adjusting the dynamic range.
Max Volume
Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting +16.5 dB
Adjustment
increments
5.0 dB
Init Volume
Adjustable range Off, Mute, -80 dB to +16.5 dB
Default setting Off
Adjustment
increments
0.5 dB
Control Turns the HDMI Control on or off.
TVAudio J2 Chooses automatically selected audio input in
conjunction with TV operation when the HDMI
Control is turned on.
ReturnChan J2 Transmits audio/video output to the TV and audio
input from the TV through a single HDMI cable.
Standby J2 Selects whether HDMI audio/video signals will be
continue to be produced when this unit is on
standby.
Audio Selects the audio output device connected to this
unit via HDMI jacks.
SWSW
C
L
SL SR
R
;HDMISetup
SETUP
VOL.
J
1 : When you set the “Max Volume” at a lower level than “Init Volume,” the “Max
Volume” setting has priority.
J
2 : This menu item appears depending on the “Control” setting.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 90 91

Comments to this Manuals

No comments