Yamaha RX-V463 Owner's Manual Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 106
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
Advanced setup
76 En
This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
•Only ASTANDBY/ON,
L
PROGRAM l / h, and
M
STRAIGHT are effective while you are using the advanced
setup menu.
No other operations can be made while you are using the
advanced setup menu.
The advanced setup menu is only available in the front panel
display.
1 Press
A
STANDBY/ON to set this unit to the
standby mode.
2 Press and hold
K
TONE CONTROL and
then press
A
STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3 Press
L
PROGRAM l / h to select the
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
4 Press
M
STRAIGHT repeatedly to change
the selected parameter setting.
5 Press
A
STANDBY/ON to confirm your
selection and set this unit to the standby
mode.
y
The settings you made are reflected next time you turn on this
unit.
Speaker impedance SP IMP.
(U.S.A. and Canada models only)
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8 MIN, 6 MIN
Select “8 MIN” to set the speaker impedance to 8 .
Select “6 MIN” to set the speaker impedance to 6 .
SIRIUS Satellite Radio Parental Lock
code number reset
SSR PIN
Use this feature to set the code number for the SIRIUS
Satellite Radio Parental Lock feature to the initial factory
setting.
Choices: RESET, CANCEL
Select “RESET” to set the code number to the initial
factory setting.
Select “CANCEL” to set the code number to the initial
factory setting.
Even if you set “SSR PIN” to “RESET”, this unit does not unlock
the locked channels. The initial factory setting of the Parental
Lock code number is “0000”.
Advanced setup
Notes
SP IMP. Speaker Impedance level
8 MIN
Front (A or B)
The impedance of each
speaker must be 8 or
higher.
Center
Surround
6 MIN
Front (A or B)
The impedance of each
speaker must be 6 or
higher.
Center
Surround
Note
01EN_RX-V463_U.book Page 76 Friday, February 1, 2008 11:43 AM
Page view 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 105 106

Comments to this Manuals

No comments