Yamaha RX-V3071 Owner's Manual Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 155
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
En 125
5
Press ENTER to confirm the setting.
Once the remote control ID is registered successfully, “OK” appears in the display window.
If “ERROR” appears, registration failed. Repeat from step 3.
6
To exit from the setup menu, press SETUP.
The registered remote control codes (p.127) are not cleared even if you change the remote control ID.
Switching the video signal type (TV FORMAT)
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC, PAL (default)
Removing the limitation on HDMI video output
(MONITOR CHECK)
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in “Resolution” (p.113) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
“MONITOR CHECK” is set to “SKIP”, reset the setting to “YES”.
Backing up/recovering the settings (RECOV./BACKUP)
Creates backup of the settings of this unit, or recovers the settings from the backup.
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO to
start the process.
Choices
YES (default)
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
OUT
1
IN
OUT
2
3
ZONE
2
STEREO
SLEEP
HD
TUNED
PRE
AMP
PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
PAL
TVFORMAT
OUT
1
IN
OUT
2
VOLUME
MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1
SL
SW2SW
SR
PL
CL R
PR
STEREO
ENHANCER
SLEEP
HD
TUNED
PRE
AMP
PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
YES
MONITORCHECK
SPIMP.-
BACKUP Creates backup of the settings of this unit in the internal memory.
RECOVERY
Recovers the settings of this unit from the backup (available only when
backup has been created).
Note
Do not turn off this unit during the recovery process. Otherwise, the settings may not be restored
correctly.
The backup does not contain user information (user account, password, etc.) or unit-specific
information (MAC address, IP address, etc).
OUT
1
IN
OUT
2
VOLUME
MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1
SL
SW2SW
SR
PL
CL R
PR
STEREO
ENHANCER
SLEEP
HD
TUNED
PRE
AMP
PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
BACKUP
RECOV./BACKUP
SPIMP.-
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 154 155

Comments to this Manuals

No comments