Yamaha RX-V1900 Owner's Manual download pdf (Page 35)

31 En

Optimizing the speaker setting for your listening room

PREPARATION

English

It is recommended that you use a tripod (etc.) to affix the

optimizer microphone at the same height as your ears

would be when you are seated in your listening position.

You can use the attached screw of a tripod (etc.) to fix the

optimizer microphone to the tripod (etc.).

2 Check if “START” is selected and then press

8ENTER.

3 Press 8ENTER to start the measurement.

Loud test tones are output from each speaker during

the measurement. Once all items are measured,

“Measurement Complete” appears.

• During the automatic setup procedure, do not perform any

operation on this unit.

• The measurement is canceled if an error occurs (page 32).

4 Press 8ENTER to display the result.

Number of the measured points MLT

Displays the number of listening positions actually

measured.

Number of speakers SP

Displays the number of speakers connected to this

unit in the following order:

Front/Back/Subwoofer

Speaker distance DIST

Displays the speaker distance from the listening

position in the following order:

Closest speaker distance/Farthest speaker distance

Speaker level LVL

Displays the speaker output level in the following

order:

Lowest speaker output level/Highest speaker output

level

“WARNING” and the number of warning messages

appear in the above of “RESULT” if any potential problem

occurs (page 33).

5 Press 8ENTER to display the setup results

in detail.

Before proceeding next operation

Once you perform the next operation, this unit starts the

automatic setup procedure in 10 seconds. For more accurate

measurements, we recommended that you get out of the room

or move to the wall where speakers are not around during the

measurement. It takes approximately 3 minutes.

Notes

[]/[]:

[ENTER]:

[

AUTO SETUP

SETUP;;;;;;;;;AUTO

MULTI MEASURE;;;;1

START

Up/Down

Start

AUTO SETUP

Loud test tones are

output.

Please keep quiet

or leave the room.

Press [ENTER]

AUTO SETUP

Measurement Complete

Press [ENTER]

Note

[]/[]:

[ENTER]:

[

AUTO SETUP

RESULT

MLT : 1

SP : 5/4/0.1

DIST: 14.0/17.0ft

LVL : -10.0/+5.0dB

>SET CANCEL

Up/Down

Detail

[p]/[[]:

[ENTER]:

RESULT MULTI MEASURE

Measured at

1 point

Select

Return

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 145 146

Comments to this Manuals

No comments

Yamaha RX-V1900 Owner's Manual Page 35

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1900