Yamaha RX-V1900 Owner's Manual download pdf (Page 37)

33 En

Optimizing the speaker setting for your listening room

PREPARATION

English

ignore the error and carry on the measurement. However, we

recommend that you solve the problem before starting the

measurement.

• If “E-10:INTERNAL ERROR” appears, you can select only

“EXIT”.

• For details about each error message, see “AUTO SETUP”

(page 113).

■ If “WARNING” appears

When this unit detects potential problems during the

automatic setup procedure, “WARNING” appears in the

result screen. Check the warning messages to correct your

speaker settings.

The adjustments are made even if “WARNING” appears,

however they may not be optimal.

1 Make sure the pointer is pointing at

“WARNING” and then press 8ENTER to

display the detailed information about the

warning.

The number on the right of “WARNING” indicates

the number of warning messages.

2 Press 8l / h repeatedly to toggle between

the warning displays.

• For details about each warning message, see “AUTO

SETUP” (page 113).

• When the corresponding warning message is not

applicable to a speaker, “–

– –” is displayed instead.

• If “SWFR:TOO LOW” or “SWFR:TOO HIGH” appears

under “W-3:LEVEL ERROR”, adjust the volume level of

the subwoofer.

3 Press 8ENTER to return to the top result

display.

If you have done all the preparations necessary, follow the

procedure below to optimize the setup of this unit for

multiple listening positions.

1 Place the optimizer microphone at the first

listening position.

The following illustration shows how to place the

optimizer microphone in order to optimize the setup

of this unit for seven listening positions for example.

/2/3/4/5/6/7: Listening positions

2 Press 8k / n repeatedly to select “MULTI

MEASURE” and then press 8l / h

repeatedly to set the number of the listening

position you want to make the measurement

at.

Choices: 1 (default), 2, 3, 4, 5, 6, 7, 8

3 Press 8k / n repeatedly to select “START”

and then press 8ENTER.

[]/[]:

[ENTER]:

[

AUTO SETUP

WARNING (2)

RESULT

MLT : 1

SP : 5/4/0.1

DIST: 14.0/17.0ft

LVL : -10.0/+5.0dB

>SET CANCEL

Up/Down

Detail

[p]/[[]:

[ENTER]:

WARNING

W-1:OUT OF PHASE

Reverse channel

FL ---

CENTER

--- PR

SL ---

SBL ---

Select

Return

Advanced automatic setup

1 7

2 6

43 5

[]/[]:

[p]/[[]:

[

AUTO SETUP

SETUP;;;;;;;;;AUTO

MULTI MEASURE;;;;7

START

Up/Down

Select

[]/[]:

[ENTER]:

[

AUTO SETUP

SETUP;;;;;;;;;AUTO

MULTI MEASURE;;;;7

START

Up/Down

Start

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 145 146

Comments to this Manuals

No comments

Yamaha RX-V1900 Owner's Manual Page 37

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1900