Yamaha RX-V1800 Owner's Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 151
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
23 En
Connections
PREPARATION
English
Audio signal flow
2-channel as well as multi-channel PCM, Dolby Digital and
DTS signals input at one of the HDMI input jacks can be output
at the HDMI OUT jack only when “SUPPORT AUDIO” is set
to “OTHER” (see page 85).
The following types of audio signals can be only input at HDMI
input jacks:
–DSD
Dolby TrueHD
Dolby Digital Plus
DTS-HD Master Audio
DTS-HD High Resolution Audio
Video signal flow
y
You can deinterlace and convert the resolution of the video
signals by using “VIDEO SET” parameters. See page 89 for
details.
When the analog video signals are input at the COMPONENT
VIDEO, S VIDEO and VIDEO jacks, the priority order of the
input signals is as follows:
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
Digital video signals input at the HDMI input jacks cannot be
output from analog video output jacks.
The analog component video signals (with 480i (NTSC)/576i
(PAL) of resolution only) are converted to the S-video or
composite video signals and output at the VIDEO or S VIDEO
MONITOR OUT jacks.
The analog component video signals with 1080p of resolution
are only output at the COMPONENT VIDEO MONITOR OUT
jacks.
The OSD signal is not output at the DVR OUT and VCR OUT
jacks and is not recorded.
Audio and video signal flow
Notes
DIGITAL AUDIO
(OPTICAL)
DIGITAL AUDIO
(COAXIAL)
HDMI
AUDIO
OutputInput
Analog output
Digital output
Notes
S VIDEO
VIDEO
COMPONENT
VIDEO
HDMI
Through
OutputInput
Video conversion ON (see page 89)
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 150 151

Comments to this Manuals

No comments