Yamaha RX-V1065 Owner's Manual download pdf (Page 38)

34 En

You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of

this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without

wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless

audio receiver and your Bluetooth component in advance.

Note

• This unit supports A2DP (Advanced Audio Distribution Profile) of the Bluetooth profile.

“Pairing” refers to the operation of registering a Bluetooth

component for Bluetooth communications. Pairing must

be performed when using a Bluetooth component with the

Bluetooth wireless audio receiver connected to this unit

for the first time or if the pairing data has been deleted.

• You only need the pairing operation for the first time that you use the

Bluetooth component with the Bluetooth wireless audio receiver.

• Pairing requires operations on this unit and on the other component with

which Bluetooth communications are to be established. If necessary,

refer to the other component’s operating instructions.

■ Pairing the Bluetooth™ wireless audio

receiver and your Bluetooth™ component

1 Rotate the RINPUT selector (or press

dDOCK) to select “BLUETOOTH” (DOCK)

as the input source.

2 Turn on the Bluetooth component you want

to pair with and set it to pairing mode.

For details on operation of the Bluetooth component,

refer to the manual supplied with it.

3 Press rOPTION on the remote control.

The Option menu for “BLUETOOTH” is displayed

(page 37).

4 Press jCursor n to select “Pairing” and

then press jENTER.

“Searching” appears and the pairing operation starts.

• To cancel pairing, press jRETURN.

• You can also start pairing operation by holding down

EMEMORY on the front panel.

5 Make sure the Bluetooth component

recognizes the Bluetooth wireless audio

receiver.

If the Bluetooth component detects the Bluetooth

wireless audio receiver, “YBA-10 YAMAHA”

(example) appears in the Bluetooth device list.

6 Select the Bluetooth wireless audio receiver

in the Bluetooth device list, and enter a pass

key “0000” into the Bluetooth component.

When pairing is complete, “Completed” appears on

the front panel display.

• The Yamaha Bluetooth wireless audio receiver can be paired with up to

eight Bluetooth components. When pairing is conducted successfully

with a ninth component and the pairing data is registered, the pairing data

for the least recently used other component is cleared.

1 Rotate the RINPUT selector (or press

dDOCK) to select “BLUETOOTH” (DOCK)

as the input source.

2 Press rOPTION on the remote control.

3 Press jCursor n to select “Connect” and

then press jENTER.

After you execute “Connect”, communication with

the Bluetooth component is established. When the

connected Bluetooth wireless audio receiver

recognizes the Bluetooth component, “BT

Connected” appears on the front panel display.

• When you press jENTER on the remote control, the connected

Bluetooth wireless audio receiver searches and connects to the last

connected Bluetooth component. If the Bluetooth wireless audio

receiver cannot find the Bluetooth component, “Not found”

appears on the front panel display.

• To disconnect the Bluetooth wireless audio receiver from the

Bluetooth component, display the Option menu again, select

“Disconnect” and then press jENTER.

4 Start playback of the Bluetooth component.

Using Bluetooth™ components

Pairing the Bluetooth™ wireless audio

receiver and your Bluetooth

component

To ensure security, a time limit of 8 minutes is set for

the pairing operation. You are recommended to read

and fully understand all the instructions before starting.

Input

DSP

Volume Trim

Connect

Pairing

Option Menu

BLUETOOTH

7ch Enhancer

Playback of the Bluetooth™

component

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 159 160

Comments to this Manuals

No comments

Yamaha RX-V1065 Owner's Manual Page 38

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1065