Yamaha RX-A850 Owner's Manual Page 143

  • Download
  • Add to my manuals
  • Print
  • Page
    / 153
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 142
En 143
Dolby Enabled SP
Select this option when using the Dolby Enabled speakers as the presence speakers. It
utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from
speakers that are placed at the same level as traditional speakers.
Place the Dolby Enabled speakers on top of or near the traditional front speakers. A Dolby Enabled
speaker unit may be integrated into a traditional speaker. For details, refer to the instruction manual of the
Dolby Enabled speakers.
Configuring the settings for Dolby Atmos playback
After making necessary connections (such as speakers and a TV) (p.20 to 33), follow
the procedure below to configure the settings required for playing back Dolby Atmos
contents.
1
Turn on the unit and TV.
2
Configure the settings of the unit.
a Switch the TV input to display video from the unit.
b Press ON SCREEN.
c Use the cursor keys to select “Setup” and press ENTER.
d Select “Speaker” “Manual Setup” “Configuration” and set “Front Presence” to
“Large” or “Small”.
It makes no difference if you select “Large” or “Small”. This setting will be automatically adjusted by
YPAO.
e Select “Layout” and set “Surround” to “Rear” (default).
Virtual CINEMA FRONT (p.57) does not support playback of Dolby Atmos contents.
f Select the presence speaker layout in “Front Presence”.
When using Dolby Enabled speakers, be sure to select “Dolby Enabled SP” before performing YPAO.
3
Perform YPAO to optimize the speaker settings automatically (p.35)
4
Press SUR.DECODE repeatedly to select “bSurround” as the
surround decoder (p.58).
This completes all the preparations. Enjoy Dolby Atmos contents with the unit.
When “Object Decode Mode” (p.108) in the “Setup” menu is set to “Enable” (default), you can also
enjoy Dolby Atmos contents with Dolby Atmos playback in the straight decode mode (p.58).
To enjoy Dolby Atmos contents on the unit, set “Object Decode Mode” (p.108) in the “Setup” menu to
“Enable” (default).
Dolby Atmos contents will be reproduced in Dolby TrueHD, Dolby Digital Plus or multi-channel PCM
format in the following situations.
– Any sound program or a surround decoder other than the Dolby Surround decoder is selected.
– Neither surround back nor presence speakers are used.
– Headphones are used (2-channel playback).
DISPLAYRETURN
ENTER
ON
SCREEN
OPTION
DI
S
PL
A
Y
RETURN
O
PTI
ON
ON SCREEN
Cursor keys
ENTER
Page view 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 152 153

Comments to this Manuals

No comments