Yamaha NS-PB120 Owner's Manual download pdf (Page 5)

Installing the speakers

4 En

English

Wall-mounting the speakers

You can mount the speakers on the wall as

follows.

1 Install screws into a solid wall or wall

support as shown left. Use 3.5 to 4 mm

(1/8") diameter self-tapping screws.

2 Hang each speaker by its keyhole slots

onto the protruding screws.

Note

• Make sure the shaft of the screw is seated in

the narrow part of the keyhole slot.

Otherwise, the speaker may fall.

Warnings

• Each speaker weighs 1.8 kg (4.0 lbs.). Do not mount the speakers on thin plywood or on a wall with a soft surface

material. Otherwise, the screws may pull out of the surface and the speakers may fall, possibly damaging the speakers

or causing personal injury.

• Do not affix the speakers to a wall using nails, adhesives, or unstable hardware. Long-term use and vibration may

cause the speakers to fall.

• To avoid accidents resulting from tripping over loose speaker cables, affix the cables to the wall.

• Mount the speakers in a wall location that will be unlikely to result in injury to an individual’s head.

• When using speaker brackets (commercially available) to mount the speakers on the wall or ceiling, we strongly

recommend using safety wire (may be supplied with the bracket) between the speaker and bracket to prevent the

speaker from falling.

• If you are not sure of a safe way to install these speakers, consult a professional installer or a building contractor.

26 mm (1")

Wall/wall support

3 mm

(1/8")

Minimum

20 mm (3/4")

Surround speaker

Center speaker

245 mm

(9-5/8")

1 2 3 4 5 6 7 8 9

No comments

Yamaha NS-PB120 Owner's Manual Page 5