Yamaha HTR-9063 Owner's Manual download pdf (Page 96)

SETUP

Setting various functions (Setup menu)

En 96

Distance

Adjusts the timing at which the speakers produce audio

so that sounds from the speakers reach the listening

position at the same time.

Selecting adjustment units

Use iCursor B / C to select the unit for distance

(meters or feet), and press iENTER.

Setting distances for each speaker

Use iCursor B / C to select the speaker you want to

configure, and press iENTER.

Then use iCursor D / E to set the distance from the

speaker to your listening position.

Level

Separately adjusts the volume of each speaker.

Use iCursor B / C to select the desired speaker, and

press iENTER.

Then use iCursor D / E to adjust the volume for the

selected speaker.

Parametric EQ

Adjusts sound quality of tone using a parametric

equalizer.

PEQ Select

Select an equalizer type.

PEQ Data Copy

Select 1 of the 3 parametric equalizer types acquired with

automatic setup and manually copy that information to the

manual adjustments.

Front L / Front R / Center / Surround L / Surround R /

Surround Back L / Surround Back R / Front Presence L /

Front Presence R / Subwoofer1 / Subwoofer2

The parametric equalizer can be used to manually adjust

sound quality for individual speakers.

Set “PEQ Select” to “Manual” and use “PEQ Data

Copy” to copy information acquired with automatic

setup. This information can be used as a basis for

performing manual adjustments.

Use iCursor B / C repeatedly to select

“Band / Gain,” “Freq. / Gain,” or “Q / Gain”

and press iENTER.

Use iCursor D / E repeatedly to adjust the

parameter and use iCursor B / C

repeatedly to adjust the gain.

Press iENTER to exit the edit window.

Repeat steps 1 to 3 to configure other

parameters.

Press hON SCREEN to close the menu.

ON SCREEN

ENTER

LEVEL

SOURCE

RECEIVE

UDIO

V-AUX

MULTI

NET

TUNER

DOC

/CH

[

]

[

]

Adjustable range 1.0 ft. to 80.0 ft. (0.30 m to 24.00 m)

Default setting 10.0 ft. (3.00 m)

Adjustment

increments

0.2ft. (0.05m)

Adjustable range -10.0 dB to +10.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB

You can also adjust the volume of each speaker by

using zLEVEL.

Press zLEVEL and use iCursor B / C to select

the desired speaker. Then use iCursor B / C to

adjust the volume for the selected speaker.

Manual Manually adjust equalizer sound.

Flat Adjust individual speakers to achieve the

same characteristics. Select this option if

speakers offer the same quality.

Front Adjust individual speakers to achieve the

same characteristics as the front left and

right speakers. Select this option if front

left and right speakers offer significantly

greater quality than other speakers.

Natural Adjust all speakers to achieve a natural

sound. Select this if high-frequency

sounds seem too strong when “PEQ

Select” is set to “Flat.”

Through (Default) Disable the equalizer.

Flat Manual Copy the “Flat” parametric equalizer

information acquired with automatic

setup.

Front Manual Copy the “Front” parametric equalizer

information acquired with automatic

setup.

Natural Manual Copy the “Natural” parametric equalizer

information acquired with automatic

setup.

To reset all parameter settings for the selected

speaker, select “Yes” in “Reset” and press iENTER.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 156 157

Comments to this Manuals

No comments

Yamaha HTR-9063 Owner's Manual Page 96

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-9063