Yamaha HTR-6230 Owner's Manual download pdf (Page 43)

39 En

Remote control features

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

You can control other components by setting the

appropriate remote control codes. For a complete list of

available remote control codes, refer to “List of remote

control codes” at the end of this manual.

Remote control code default settings

Note

• You may not be able to operate your Yamaha component even if a

Yamaha remote control code is preset as listed above. In this case, try

setting another Yamaha remote control code.

1 While pressing and holding one of the input

selector buttons (f) on the remote control to

select the input area you want to set up,

press bAV POWER for more than 3

seconds.

2 Press the numeric buttons (0 to 9) (y) to

enter the four-digit remote control code for

the component to be used.

When the setting succeeds, “RemoteSetup OK”

appears; however, when it dues not, “RemoteSetup

NG” appears on the front panel display.

Notes

• If the manufacturer of your component has more than one code, try each

of them until you find the correct one.

• If you do not press any buttons within 30 seconds in step 2, the setup

process is canceled. If this happens, repeat the setup procedure.

■ Resetting all remote control codes

Use this feature to clear all the remote control codes

previously set and reset all of them to the initial factory

settings.

1 While pressing and holding hAMP, press

bAV POWER for more than 3 seconds.

2 Press the numeric buttons (y) to enter the

code number “9981.”

“RemoteSetup OK” appears on the front panel

display, and the remote control codes previously set

are cleared and reset to the initial factory settings.

• If you do not press any buttons within 30 seconds after step 1, the

clearing process is canceled. In this case, repeat the clearing

procedure.

Setting remote control codes

Input

source

Component

Comments to this Manuals

No comments

Yamaha HTR-6230 Owner's Manual Page 43

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-6230